The Thermomix TM31 has been and is one of the best-selling models by Vorwerk, the company behind the kitchen robot. By market share, it is also one of the models that has reported the highest number of errors throughout its short history. As usual, errors are emitted through the robot's screen in the form of messages and codes. This time we have made a compilation with the list of errors and messages of the Thermomix TM31 , as well as the solution to each of the device problems.
Mambo Cecotec 8090 and 9090: list of errors and problems and their solution
index of contents
- Solution to Error - Thermomix TM31
- Solution to Error 22 of the Thermomix TM31
- Solution to Error 23 of the Thermomix TM31
- Solution to Error 26 and Error 32 of the Thermomix TM31
- Solution to Error 27, Error 28, Error 30 and Error 31 of the Thermomix TM31
- Solution to Error 34 of the Thermomix TM31
- Solution to Error 35, Error 36 and Error 37 of the Thermomix TM31
- Solution to Error 38 and Error 39 of the Thermomix TM31
- Solution to Error 52 of the Thermomix TM31
- Solution to Error 53 of the Thermomix TM31
- Solution to Error 55 of the Thermomix TM31
- Solution to Error 58, Error 59, Error 60 and Error 61 of the Thermomix TM31
- Solution to Error 67 of the Thermomix TM31
- Solution to Error 68 of the Thermomix TM31
- Solution to Error 69 of the Thermomix TM31
- Solution to Error 70 of the Thermomix TM31
- Solution to Error 72 of the Thermomix TM31
- Solution to Thermomix TM31 LOAD Error
- Solution to OPEN Error of the Thermomix TM31
- Solution to Error 8888 of the Thermomix TM31
- Solution to Thermomix TM31 OULD Error
- Solution to Error 0 of the Thermomix TM31
Solution to Error - Thermomix TM31
We have removed the food from the scale just at the time of measurement. The solution is to set the scale to 0 to reweigh the food.
Solution to Error 22 of the Thermomix TM31
It is usually related to the robot's power supply system . If the message appears repeatedly, we will have to go to customer service to proceed with the repair.
Solution to Error 23 of the Thermomix TM31
It is related to a problem with the Thermomix container glass. The solution is to disconnect the plug and reconnect it to force a system restart. It is also recommended to clean the bowl contacts properly.
If the message persists, we will have to repair the glass or replace it with a new one.
Solution to Error 26 and Error 32 of the Thermomix TM31
It appears when the voltage of the electric current is weak, either due to a lack of power or because the wall socket is defective . If the message appears repeatedly we will have to repair the robot at Vorwerk technical service.
Solution to Error 27, Error 28, Error 30 and Error 31 of the Thermomix TM31
This is a hardware error in the Thermomix TM31. The only solution is to repair the robot in the technical service if the messages appear repeatedly , either with different codes or with the same error code.
Solution to Error 34 of the Thermomix TM31
Indicates that the robot motor is overloaded. It may be due to an excess in the amount of food stored in the container glass . It can also be related to the blockage of the blade by food debris or consistent food pieces. The solution is so simple to reduce the amount of food in the glass or clean the blade of food debris.
Solution to Error 35, Error 36 and Error 37 of the Thermomix TM31
If the message appears frequently we will have to take the robot to repair the official Vorwerk technical service .
Solution to Error 38 and Error 39 of the Thermomix TM31
It is usually related to a robot hardware problem. We can try to disconnect and connect the plug to force its restart . If the messages persist, we will have to contact the official technical service.
Solution to Error 52 of the Thermomix TM31
This is a problem related to the container. In general, it appears when a very cold or frozen food has been placed in the glass. If we have stored the glass in the fridge , the error is likely to persist until the temperature rises to the minimum limit supported by the robot.
What the brand recommends is to wash the glass with hot water and process frozen or very cold foods quickly to prevent the temperature of the glass from dropping. We can also try to clean the glass contacts to remove any element that hinders food processing.
Solution to Error 53 of the Thermomix TM31
This problem is derived from a bad bad connection with the contacts of the glass. To make the warning disappear we will have to clean the glass contacts .
Solution to Error 55 of the Thermomix TM31
Problems with the robot scale. If the message appears repeatedly we will have to use Vorwerk technical service .
Solution to Error 58, Error 59, Error 60 and Error 61 of the Thermomix TM31
This is a general hardware problem whose only solution is to go to Thermomix technical service .
Solution to Error 67 of the Thermomix TM31
Robot scale failure. It has no solution, so we will have to resort to technical service if the message persists for several days.
Solution to Error 68 of the Thermomix TM31
It is related to a general hardware problem. We will have to go to the company's technical service to find a personalized solution.
Solution to Error 69 of the Thermomix TM31
It usually appears when the food processor experiences overheating problems . If the message appears repeatedly we will have to resort to technical service.
Solution to Error 70 of the Thermomix TM31
This is a general problem with the Thermomix TM31 hardware. Vorwerk recommends disconnecting and reconnecting the plug to force a restart of the device .
Solution to Error 72 of the Thermomix TM31
It corresponds to a general problem with the robot components. We will have to go to the technical service to solve it .
Solution to Thermomix TM31 LOAD Error
The glass is overloaded or overheated. We will have to wait for the engine to cool down or reduce the amount of food stored in the glass.
Solution to OPEN Error of the Thermomix TM31
The robot speed selector is not in the open position. To eliminate the warning we will have to turn the selector to the OPEN position .
Solution to Error 8888 of the Thermomix TM31
The weight value registered by the balance is outside the range allowed by the system. The brand recommends setting the scale to 0 and then reducing the weight of the food . It is also recommended to check the sockets that support the balance.
Solution to Thermomix TM31 OULD Error
A problem very similar to message 8888. The solution is to reduce the weight of the food and control the feet of the scale . If the problem persists, it is likely that it has been damaged.
Solution to Error 0 of the Thermomix TM31
Same error as the previous two. We will have to reduce the weight of the food or check the condition of the feet.